Foamiran Hydrangea

Hello everyone. 

Today I'm sharing three kinds of foamiran hydrangea's on the Crafteezee blog.

More info here:

https://crafteezee-shop.blogspot.com/2019/07/foamiran-hydrangeas.html

Hugs, Henriëtte.

Bell cups with foamiran flower

Last week I bought several dried poppy bell pods (white) and I thought it would be nice to use them in combination with foamiran flowers. This is what I came up with.

Three bell cups filled with different foamiran flowers in white and pink, snowed branches, curly moss and leaves.

I used white and pink foamiran sheets from 14 craft bar. The stamens are also from this shop.

The bell cups, branches and curly moss are from a Dutch flower arranging shop.

To make this rose I used dies from 14 craft bar.

I also made some pink hydrangea flowers. You can find a step by step tutorial on how I makes these on a this blog post.

There is also a clover in this bell cup. I made the clover by watching a tutorial on you tube (link here).

In this bell cup are some more hydrangea, a poinsettia and a few fantasy flowers.

For the poinsettia I used this poinsettia die and for the little flowers I used some of these smaller dies from 14 craft bar.

The cute bell cups make a wonderful centerpiece on a table.

Thanks for stopping by today.

Hugs, Henriette.

Autumn wreath with foamiran flowers

Today I've finished my foamiran autumn wreath.
This past week I had a week off from work and plenty of time to make the flowers and leaves on this wreath.

I bought the wreath itself at a garden center. The berries are not made by me (although I want to try to make these in the near future). All the other flowers are handmade using foamiran from 14 craft bar. The feathers are from ebay.

Here are some close up pictures of the flowers.

I colored all  my flowers with chalks not with soft pastels this time. I like working with chalks a bit better I guess. I've created a dahlia, a sunflower, hydrangea, a vintage rose and a few fantasy flowers. I have a previous tutorial on how to make hydrangea flowers here.

Look at those cute stamens in the orange flowers. These are also from 14 craft bar.

I did use dies for the orange flowers but for the other flowers I hand cut every petal. I made the leaves by printing free templates from internet and cutting the shapes out of foamiran.

That's it for today.

I really would appreciate it if you tell me what you think of this autumn wreath.

Thanks so much for stopping by.

Hugs Henriette,

Foamiran Hydrangea

This project was not my own idea. I saw this at a Japanese site/webstore called creema.

It was a lot of work. I did not count all the flowers but I guess more than 60 and it took me more than 10 hours work. I did not use a die and cut all the flowers by hand, but if you have one that would be alot easier.

I made a step-by-step tutorial on how I made this foamiran hydrangea. I made about 18 flowers at a time. This took me about an hour each time. Then I had 6 bunches with 3 flowers.

Step 1:

I used white foamiran for this project. I cut pieces of 3 cm by 3 cm (1,1 inch x 1,1 inch).

Step 2:

You cut 4 times in the middle of each side.

Step 3:

You cut the petal shapes. First on one side, then you flip it over and cut the other side.

At the bottom of this blogpost is a link to a video tutorial (in russian) where this technique is demonstrated.

The petals don't have to be perfect. In nature the petals aren't perfect either and when the foam is heated you won't see it.

If you have a four petal die than I advice you to use that one. It's much faster.

Step 4: 

You color all the flowers. This can be done with oil pastels, inks or even chalks. I used oil pastels in yellow, pink and green. Some leaves have more than one color.

You color both sides.

Step 5:

Pre heat your iron (mine is between 2 to 3 dots heat) and hold the flowers a few second agains the heated iron. The flower will curl and shape.

Step 6:

You prick a hole in the middle of the flowers and put a flower stamen through it. I used pink and white stamens. I cut off one of the ends.

Step 7:

The gluing. With my hot glue gun I put a little bit of glue on the stamen, pull it down and press between my fingers at the bottom of the flowers.  This technique is also shown in the video.

Step 8:

I cut a little piece of floral wire and taped 3 flowers together with the wire. I used a piece of wire otherwise I couldn't prick it in the styrofoam, but you can skip this part and glue the flowers directly on the styrofoam ball.

Step 9:

I used a styrofoam ball from about 6 cm (2,3 inch).

I prick a hole in it and pushed the flowers in. Different colors next to each other. Tightly together so you can see the styrofoam. You work your way around untill the whole ball is filled.

The stem is a pencil wrapped with flowertape.

I put my hydrangea in a bowl filled with flower oasis and covered it with reindeer moss.

The little butterfly is a paper punch out and I've added a green organza ribbon.

Here is a link to a video tutorial in Russian. https://www.youtube.com/watch?v=VzAyGuDd2E8.

On this video you can watch how the flowers are cut and shaped. I did some steps different than she does it.

I hope my step by step instruction is clear enough. If you have any questions just ask in a comment.

Thanks for stopping by.

Hugs, Henriette.